7. Resetting and Clearing the Server
Express5800/R120g-2E, T120g Maintenance Guide
53
Chapter 1 Maintenance
7.4
Clearing BIOS Settings (NVRAM(CMOS Memory))
To set the BIOS settings back to the factory settings (clearing NVRAM(CMOS memory)), use the jumper
switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
Tips
Use BIOS Setup Utility (SETUP) usually to return the settings to the factory
settings.
To clear the password or the NVRAM(CMOS memory), use the corresponding jumper switch illustrated in the
figure below.
To clear the password, use the password clear jumper switch. To clear the NVRAM (CMOS memory), use the
CMOS clear jumper switch.
Important Do not change any other jumper switch. Any change will cause the server to
fail or malfunction.
CMOS
クリアジャンパー
クリア
クリア
パスワードクリアジャンパー
Clear CMOS Jumper
Clear Password Jumper
Clear
Clear
Summary of Contents for Express5800/R120g
Page 231: ...MEMO...
