1. Specifications
Express5800/R120e-2M User’s Guide
152
Chapter 4 Appendix
1.
Specifications
Product name
Express5800/R120e-2M
N code
N8100-2073F
N8101-675F N8101-676F N8101-677F N8101-678F N8101-679F N8101-680F
Intel ®Xeon® processor
CPU
E5-2609 v2
E5-2620 v2
E5-2630 v2
E5-2630L v2
E5-2637 v2
E5-2640 v2
Clock speed
2.50GHz
2.10GHz 2.60GHz 2.40GHz 3.50GHz 2.00GHz
Number of CPUs,
standard/maximum
1/2
3rd cache
10M
15M
20M
CPU
Number of cores (C) /
Number of threads (T)
per CPU
4C/4T 6C/12T
4C/8T 8C/16T
Chipset
Intel® C602-J chipset
Capacity,
standard/maximum
Not pre-installed /Unbuffered DIMM: 64GB (16x 4GB),
Registered DIMM: 384GB (24x 16GB),
Load Reduced DIMM: 1536GB (24x 64GB)
Memory module
DDR3L-1600 Unbuffered DIMM (4GB),
DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1866 Registered DIMM (8/16GB),
DDR3L-1333 Load Reduced DIMM (32GB), DDR3L-1600 Load Reduced DIMM (64GB)
Maximum operating
frequency
1333MHz 1600MHz
1866MHz 1600MHz
Error check, correction
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Memory sparing
Supported
Memory
Memory mirroring
Supported
Internal
(standard)
－
Internal
(maximum)
HDD: SATA 16TB (16x1TB), SAS 17.2TB (16x1.2TB),
SSD: SAS 6.4TB (16x 400GB) (with optional HDD cage installed)
Hard disk
drive
Hot swap
Supported
Interface / RAID level
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
Internal or external drive (option) *1
FDD
Option: Flash FDD (1.44MB) *2
Auxiliary
storage
Device bay
3.5-inch bay x 1
Expansion
slots
Supported slots
1 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 312 mm in length)
2 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 220 mm in length)
(One slot is required in 2-CPU configuration.)
2 x PCI EXPRESS 3.0 (x4 lane, x8 socket) (Low profile, 220 mm in length)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Chip/VideoRAM
Embedded management controller chip / 32 MB
Graphics
Graphic display /
resolution
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024
Interface
9x USB 2.0 (2x front, 4x rear, x3 internal), 2x Analog RGB (Mini D-sub15-pin, 1x front, 1x rear),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial port A, 1x rear, optional port can be used (up to two
ports in total)).
2x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
Power supply unit
Not preinstalled / 450W or 800W or 1200W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug
available)
(Maximum: 2) 100/200VAC±10%, 50/60Hz
Redundant power supply
Supported (option, hot-plug available)
Redundant fan
Supported (option, hot-plug available)
External dimensions (width × depth ×
height)
When power supply unit N8181-86 (450W) or N8181-87 (800W) is selected:
448.0 mm x 735.8 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 770.8 mm x 88.0 mm (Front bezel, inner rails, projections are included)
When power supply unit N8181-88 (1000W) is selected:
448.0 mm x 770.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 805.0 mm x 88.0 mm (Front bezel, inner rails, projections are included)
Weight (Standard/ Max.)
20.5kg / 33kg (Rails included)
High-load state
680VA/679W
680VA/679W
680VA/679W 640VA/639W 780VA/779W 710VA/709W
Power
consumption
(100V at
maximum
configuration)
40°C environment
820VA/810W
820VA/810W
820VA/810W 780VA/770W 920VA/910W 850VA/840W
Operating
10 to 40°C / 20 to 80%,
10 to 35°C / 20
to 80%,
10 to 40°C / 20
to 80%,
Environmental
requirements
Temperature/Humidity
Storage –10
～
55°C / 20 to 80% (no condensation either when operating or when stored)
