1. Specifications
Express5800/R120e-2M User’s Guide
154
Chapter 4 Appendix
Product name
Express5800/R120e-2M
N code
N8100-2073F
N8101-681F N8101-682F N8101-683F N8101-684F N8101-685F N8101-686F
Intel ®Xeon® processor
CPU
E5-2650 v2
E5-2660 v2
E5-2670 v2
E5-2690 v2
E5-2697 v2
E5-2695 v2
Clock speed
2.60GHz
2.20GHz 2.50GHz 3.00GHz 2.70GHz 2.40GHz
Number of CPUs,
standard/maximum
1/2
3rd cache
10M
15M
20M
CPU
Number of cores (C) /
Number of
threads (T) per CPU
4C/4T 6C/12T
4C/8T 8C/16T
Chipset
Intel® C602-J chipset
Capacity,
standard/maximum
Not pre-installed /Unbuffered DIMM: 64GB (16x 4GB),
Registered DIMM: 384GB (24x 16GB),
Load Reduced DIMM: 1536GB (24x 64GB)
Memory module
DDR3L-1600 Unbuffered DIMM (4GB),
DDR3L-1600 Registered DIMM (2/4/8/16GB), DDR3L-1866 Registered DIMM (8/16GB),
DDR3L-1333 Load Reduced DIMM (32GB), DDR3L-1600 Load Reduced DIMM (64GB)
Maximum operating
frequency
1866MHz
Error check, correction
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Memory sparing
Supported
Memory
Memory mirroring
Supported
Internal
(standard)
－
Internal
(maximum)
HDD: SATA 16TB (16x1TB), SAS 17.2TB (16x1.2TB),
SSD: SAS 6.4TB (16x 400GB) (with optional HDD cage installed)
Hard disk
drive
Hot swap
Supported
Interface / RAID level
SATA 3, 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Optical disk drive
Internal or external drive (option) *1
FDD
Option: Flash FDD (1.44MB) *2
Auxiliary
storage
Device bay
3.5-inch bay x 1
Expansion
slots
Supported slots
1 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 312 mm in length)
2 x PCI EXPRESS 3.0 (x8 lane, x16 socket) (Full height, 220 mm in length)
(One slot is required in 2-CPU configuration.)
2 x PCI EXPRESS 3.0 (x4 lane, x8 socket) (Low profile, 220 mm in length)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to RAID Controller)
1 x PCI EXPRESS 3.0 (x8 lane, x8 socket) (Dedicated to LAN riser card)
Chip/VideoRAM
Embedded management controller chip / 32 MB
Graphics
Graphic display /
resolution
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024
Interface
9x USB 2.0 (2x front, 4x rear, x3 internal), 2x Analog RGB (Mini D-sub15-pin, 1x front, 1x rear),
1x Serial port (RS-232C compliant / D-sub 9-pin, Serial port A, 1x rear, optional port can be used (up to two
ports in total)).
2x 1000BASE-T LAN connector (1000BASE-T/100BASE-T/10BASE-T supported, RJ45, 2x rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x rear)
Power supply unit
Not preinstalled / 450W or 800W or 1200W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug
available)
(Maximum: 2) 100/200VAC±10%, 50/60Hz
Redundant power supply
Supported (option, hot-plug available)
Redundant fan
Supported (option, hot-plug available)
External dimensions (width × depth ×
height)
When power supply unit N8181-86 (450W) or N8181-87 (800W) is selected:
448.0 mm x 735.8 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 770.8 mm x 88.0 mm (Front bezel, inner rails, projections are included)
When power supply unit N8181-88 (1000W) is selected:
448.0 mm x 770.0 mm x 87.2 mm (Front bezel, inner rails, projections are excluded)
482.0 mm x 805.0 mm x 88.0 mm (Front bezel, inner rails, projections are included)
Weight (Standard/ Max.)
20.5kg / 33kg (Rails included)
High-load state
710VA/709W
710VA/709W
750VA/749W 780VA/779W 780VA/779W 750VA/749W
Power
consumption
(100V at
maximum
configuration)
40°C environment
850VA/840W
850VA/840W
890VA/880W 920VA/910W 920VA/910W 890VA/880W
Operating
10 to 40°C / 20 to 80%,
10 to 35°C / 20
to 80%,
Environmental
requirements
Temperature/Humidity
Storage –10
～
55°C / 20 to 80% (no condensation either when operating or when stored)
