1. Installing Internal Optional Devices
Express5800/R120e-2M User’s Guide
82
Chapter 2 Preparations
1.14.4
Installing FBU
Take the steps below to install FBU.
See steps 1 to 6 in
Chapter 2 (1.3 Overview of Installation and Removal)
for preparations.
1.
Put the FBU, provided as the standard
accessory of RAID Controller, on the
support bar. Then, mount the FBU
bracket, provided as the standard
accessory of RAID Controller, and secure
it with a screw.
2.
Connect the FBU control cable (600
mm), provided as the standard accessory
of RAID Controller, to FBU.
3.
Connect the FBU control cable (600 mm
in length) and Mini SAS cable to RAID
Controller.
Align the black marking on connector of
FBU control cable with that on connector
of RAID Controller.
4.
Remove one screw from the blank cover
on the PCI riser card, then remove the
blank cover.
5.
Mount the RAID Controller to PCI riser
card, and secure it with the screw you
have removed in Step 14.
