NEC Express5800/R120e-2M User Manual Download Page 91

Page: 91 / 156

1. Installing Internal Optional Devices

Express5800/R120e-2M User’s Guide

Chapter 2 Preparations

Continue to install or remove internal optional devices, mount and connect the server, and turn it
on.

Important

Connecting N8151-105 internal RDX (USB) may change boot device order.

Run BIOS SETUP, select Boot menu, and change boot device order for

removable device to lower than the boot device.

10. Confirm that POST displays no error message.

If any error messages are displayed, see Chapter 3 (1. POST Error Message) in "Maintenance
Guide".

11. Install the device driver for backup file device.

1.17.2

Removal

Remove the backup file device in reverse order of installation.

Summary of Contents for Express5800/R120e-2M





























































































































































Search results

Summary of Contents for Express5800/R120e-2M

Reviews:

Related manuals for Express5800/R120e-2M

Brands by name

Popular brands

NEC Express5800/R120e-2M, User Manual

Search results

Summary of Contents for Express5800/R120e-2M

Reviews:

Related manuals for Express5800/R120e-2M

Brands by name

Popular brands