7. Resetting and Clearing the Server
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
47
Chapter 1 Maintenance
7.4
Clearing BIOS Settings (NVRAM Memory)
To recover the BIOS settings to the factory settings (clearing NVRAM memory), use the jumper switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
Tips
Usually, use BIOS Setup Utility (SETUP) to recover the settings to the factory
settings (Load Setup Defaults).
To clear the password or the NVRAM memory, use the corresponding jumper switch illustrated in the figure
below.
Important Do not change any other jumper switches. Any change will cause the server
to fail or malfunction.
Clear Password Jumper
(J_PASSWORD)
Clear NVRAM Jumper
(J_CLRCMOS)
3 2 1
3 2 1
Clear
Keep (factory setting)
Keep (factory setting)
Clear
