5. RAID System Configuration
Express5800/R110i-1, T110i-S, T110i Maintenance Guide
142
Chapter 2 Useful Features
5.5
Menu Tree of UEFI Mode
Menu
Value
Descriptions
Controller Management
> View Controller Information
Display of the RAID controller information
Controller Marketing Name
LSI Embedded MegaRAID
Name of the RAID controller
Display may differ due to the restrictions for the
number of digit in the display depending on the
workstation.
Serial Number
none
Serial number of the RAID controller
PCI ID
Workstation-dependent
PCI ID of the RAID controller
Host Interface
PCI-E
Host interface
Device Port Count
Workstation-dependent
Number of ports
PCI Slot Number
Integrated
PCI slot number of the RAID controller
Drive Count
Workstation-dependent
Number of Physical Drives
Virtual Drive Count
Number of Virtual Drives
Encryption Capable
No
Encryption setting
Minimum Stripe Size
64 KB
Minimum stripe size
Maximum Stripe Size
64 KB
Maximum stripe size
Driver Version
UEFI driver version
UEFI Driver TimeStamp
UEFI driver build version
> Change Controller Properties
Change of the parameter for the RAID
controller
Apply Changes
Reflecting the change
Set Factory Defaults
Setting to the default value
Set Boot Device
Setting of the Virtual Drive to start up the OS
Rebuild Rate
30
Ratio of the Rebuild IO (30%)
Background Initialization (BGI) Rate
30
Ratio of the Background Initialize IO (30%)
Consistency Check Rate
30
Ratio of the consistency check IO (30%)
Disk Coercion
1 GB
Forcibly pack Physical Drives of different size
Disk WC
Disable
Cache setting of the Physical Drive
The recommended setting is Enable
Read Ahead
Enable
Read Ahead setting
Auto Rebuild
Enable
Automatic Rebuild setting
Auto Resume
Enable
Setting whether or not to reboot the system
automatically when it is rebooted during
Initialize, Rebuild, or consistency check.
> Clear Configuration
Clearing the RAID Configuration
Virtual Drive Management
> Create Configuration
Creating the RAID Configuration
Save Configuration
Storing the created configuration
Select RAID Level
Selecting the RAID level
Select Drives From
Selecting the Physical Drive creating the Virtual
Drive
Select Drives
Selecting the Physical Drive creating the RAID
