1. Installing Internal Optional Devices
Express5800/GT110d User’s Guide
79
Chapter 2 Preparations
6.
Remove the four screws securing the HDD cage.
7.
Remove the HDD cage from the server.
Important
Be careful not to hit the motherboard components with the HDD cage.
Be careful not to pull on the cables when removing the Hard Disk Drive.
8.
Gently place the removed HDD cage onto a desk
that has undergone anti-static treatment.
9.
Face the substrate surface downward and in front
of the Hard Disk Drive connector, and then slowly
and carefully insert it into the slot.
10. Secure the Hard Disk Drive by fitting the four
screws provided by the 2.5-inch Hard Disk Drive
cage or Hard Disk Drive to the Hard Disk Drive an
HDD cage screw holes.
Important The screws for securing the Hard Disk Drive are provided with both the
2.5-inch HDD cage and the Hard Disk Drive, and either may be used. Do not
use screws other than those described above when securing the Hard Disk
Drive. Using screws of a length greater than that required can cause damage
to the Hard Disk Drive.
Connector
Place the board side down.
