4. Names and Functions of Parts
Express5800/GT110d User’s Guide
38
Chapter 1 General Description
4.5.3
Disk access LED ( )
The disk access LED lights or flashes green when an internal Hard Disk Drive or the optical disk drive is
being accessed.
4.5.4
Optical disk access LED
The ACCESS LED lights/flashes when the media set on the optical disk drive is being accessed.
4.5.5
LINK/ACT LED ( 1,
2,
M)
This LED indicates the state of the standard network port. If the server and HUB is supplied with power and
connected properly, the LED is on (LINK). If the network port is transmitting/receiving data, the LED flashes
(ACT).
If the LED does not turn on in LINK state, check the cable or connection. If the LED remains off, the network
(LAN) controller may be defective. Contact the store where you purchased the product or your maintenance
service company.
4.5.6
Speed LED ( 1,
2,
M)
This LED indicates which network interface is used.
The two LAN connectors for data transmission support 1000BASE-T, 100BASE-TX, and 10BASE-T
and the LED indicates which network interface is being used.
Amber: Operating with 1000BASE-T
Green: Operating
with
100BASE-TX
OFF: Operating
with
10BASE-T
The LAN connector used for management supports 100BASE-TX and the LED flashes green during
the operation.
