Setting Up the System 2-7
!
CAUTION
Temperature
: The operating temperature of the server,
when installed in an equipment rack, must not go below 5 °C
(41 °F) or rise above 35 °C (95 °F). Extreme fluctuations in
temperature can cause a variety of problems in your server.
Ventilation
: The equipment rack must provide sufficient
airflow to the front of the server to maintain proper cooling.
It must also include ventilation sufficient to exhaust a
maximum of 4,100 Btu's per hour for the server. The rack
selected and the ventilation provided must be suitable to the
environment in which the server will be used.
The template supplied with your rack mount kit defines the location of the
mounting screws in the system rack where the server is to be installed (see
Figure 2-2). The template can be placed on the front and rear of the rack cabinet
to show the mounting screw hole positions of the server guide rail assemblies,
front faceplate screws, and cable retention arm plate.
Note:
Ensure that the template is aligned properly so
that the mounting screw hole cut outs are at the same height
on each side of the cabinet and level with each other.
The front of the template defines the front rail mounting
screw holes and front faceplate screws holes of the server in
the rack cabinet. The back of the template defines the rear
rail mounting screw holes of the server in a rack cabinet.
The back of the template also defines the screw holes for
the cable retention arm plate of the server in a rack cabinet.
Front View
Rear View
Figure 2-2. Template
Summary of Contents for Express5800/180Rb-7
