![background image](http://html.mh-extra.com/html/nec/express5800-180rb-7/express5800-180rb-7_user-manual_251233144.webp)
4-38
Upgrading Your System
32.
Reinstall the memory module board DIMM-side down by grasping its sides
and carefully sliding it into the slot guides until the levers engage with the
flanges in front of the guides. Simultaneously rotate the levers inward until
they are flush with the edge of the module to seat the connector of the
module in the connector of the midplane. See Figure 4-27.
Figure 4-27. Installing the Memory Module Board
33.
Reinstall the fan array housing ensuring that it engages with the support tabs
(see Figure 4-20). Insert the three screws that you removed earlier and
tighten the screws firmly (8.0 inch-pounds).
Note:
When installing the fan array housing, be careful
not to accidentally move the thin sheet of insulating material
on the front panel board. Proper insertion of the LED light
pipes depends on the correct alignment of the insulating
material.
34.
Reinstall all the fans and the fan array cover. See “Replacing a Fan” earlier
in this chapter.
35.
Reinstall the memory module cover. See “Installing the Memory Module
Cover” earlier in this chapter.
36.
Remove the processor air baffle plate from the right side of the processor
retention cage by releasing its two captive screws and pulling it straight up
and out of the processor retention cage (see Figure 4-28).
Summary of Contents for Express5800/180Rb-7
