NEC Express 5800/140Rb-4, Service Manual

Page: 63 / 145

Removing DIMMs
1. Remove the memory board (page 36). Place the board component-side up on a nonconductive,
static-free surface.
2. Locate the DIMM you want to remove and gently push down on the plastic ejector levers (Figure
24, A) to eject the DIMM from its socket.
3. Hold the DIMM only by its edges, being careful not to touch its components or gold edge
connectors. Carefully lift it away from the socket and store it in an antistatic package.
Figure 24. Removing DIMMs
Installing and Removing Components 55