NEC Express 5800/140Rb-4, Service Manual

Page: 128 / 145

Error Code and Message Description Action
occurred during
fan sensor
reading detected during read
of FAN sensor.
0B7C An error
occurred during
the redundant
power module
confirmation An error occurred
while redundant
power supply was
configured. Contact your service representative to replace the
power unit.
0B7D Normal
operation can
not be
guaranteed with
use of only one
PSU System is running on
only one power
supply Contact your service representative to replace the
power unit.
0B80 BMC Memory
Test failed BMC SRAM test
error
0B81 BMC Firmware
Code Area CRC
check failed CRC error occurred
in BMC code area
0B82 BMC core
hardware failure A firmware task
cannot be completed
due to BMC
hardware error.
0B83 BMC check
failure BMC 1BF or OBF
check failed
0B8A BMC SEL area
full BMC SEL area full
0B8B BMC progress
check timeout BMC progress check
timeout
0B8C BMC command
access failed BMC command
access failed
0B8D Could not
redirect the
console – BMC-
busy Could not redirect
the console – BMC-
busy
0B8E Could not
redirect the
console BMC
error Could not redirect
the console BMC
error
OB8F Could not
redirect the
console BMC
parameter error Could not redirect
the console BMC
Parameter error
0B90 BMC Platform
Information Area
corrupted The platform
information area of
BMC is damaged
0B91 BMC update BMC update Turn OFF server power source once and then on
Error Messages and Error Codes 125