NEC Express 320Lc, User Manual, Page: 75 / 145

Windows Setup 4-31
Step 5: Set Dual LAN Configuration
The NEC Express5800/ft series builds a dual LAN configuration by using "Stratus emb-82559
10/100 Enet Adapter" (100Base) and "Stratus emb-82544GC Copper Gigabit Adapter" (1000Base)
mounted as standard on the PCI module.
If an Ethernet adapter is not used (not connected to cable), set it to “Disable” in [Network
Connections] from Control Panel. If an Ethernet adapter you are about to disable has dual LAN
settings (AFT function), remove the dual LAN settings before disabling it. When an Ethernet
adapter is enabled but not connected to a cable, NEC ESMPRO Agent determines the port has an
error (no medium) and changes the status of Ethernet board ([ft server] – [PCI Module] – [Ethernet
Board]) on the Data Viewer to red. The server status on the Operation Window also changes to red
(error).
TIPS:
To set dual LAN configuration, log on as "Administrator" or a member of the group
"Administrators".
1. Display the [Intel(R)PROSet II] dialog box.
2. Start one of the start menu modes below:
Standard start menu mode
Click [Intel(R)PROSet II] in [Control Panel] from the [Start] menu.
Classic start menu mode
(1) Select [Control Panel] from [Settings] of the [Start] menu.
(2) Double-click the [Intel(R)PROSet II] icon.
3. Select [Network Components] from Network Component Tree. The pop-up menu appears.
Select [Fault Tolerance] from [Create Team].