manualshive.com logo in svg

NEC Express 320Lc, User Manual, Page: 61 / 145

Share
Download
NEC Express 320Lc User Manual Download Page 61

Windows Setup

    4-17 

6.  “Important 1” message will appear. 

Read the message and follow the instructions. 

 
 
 
 
 
 
 
 
 
 
 

 

7.  “Important 2” message will appear.   

Read the message and follow the instructions.     

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

8.  “Important 3” message will appear.   

Read the message and follow the instructions.     

 
 
 
 
 
 
 
 
 
 
 

 

*** Important Notice 1 
-  No optional boards should be installed in the PCI modules at this 

time. If there are optional boards installed in the PCI modules, 
please abort the installation process, power down the system 
and remove the optional boards. Afterwards power on the system and 
restart the intallation process. 
Caution: The installation process will not complete properly if 
there are optional boards installed in the PCI modules. 

 
Do you want to continue the installation [Y,N]?

 

 

*** Important Notice 2 
-   Only the first Hard Disk Drive (slot 1 of the active PCI module) 

should be inserted. 
If there is more than one Hard Disk Drive inserted in the active PCI 
module, please abort the installation process, power down the system 
and remove all Hard Disk Drives except for the Hard Disk Drive 
inserted into slot 1 of the active PCI module. 
Caution:   If you continue installing with multiple Hard Disk Drives 

inserted, the installation process may not be able to 
properly determine the system drive and incorrect installation 
and/or loss of data may result. 

 
Do you want to continue the installation [Y,N]?

 

 

*** Important Notice 3 
-   Confirm that there are no optional SCSI devices 

such as tape devices connected to the external rear SCSI 
connectors 
If there are optional SCSI devices connected to the external rear 
SCSI connectors, terminate the installation process and remove the 
devices, and then restart the installation process. 
Caution:   When optional SCSI devices are connected to the external 

rear SCSI connectors, the installation process will not 
complete properly. 

 
Do you want to continue the installation[Y,N]?

 

Summary of Contents for Express 320Lc


















































































































































Reviews:

No comments