NEC EXIFU-A1 Installation, Configuration And Operation Download

Page: 2 / 33

Contents

XN120 EXIFU Guide

What is the EXIFU?...............................................................................................................................................3

System Connection Diagram...............................................................................................................................3

Installation Procedure ..........................................................................................................................................4

1- Unpack the Card. ..............................................................................................................................................5

2- Install the EXIFU ...............................................................................................................................................6

3- Test the EXIFU ..................................................................................................................................................8

4- Configure the EXIFU.......................................................................................................................................10

XN120 Configuration Mode ..............................................................................................................................11

Ethernet Port .......................................................................................................................................................13

Ethernet Port Specification...............................................................................................................................14

Ethernet Cable .................................................................................................................................................14

Fit the Ferrite Core to the Ethernet Cable ........................................................................................................14

Maximum Cable Length ...................................................................................................................................14

Serial Socket - Call Logging (SMDR) ................................................................................................................15

Which trunks will output to the call logger. .......................................................................................................15

Which telephones will output to the call logger. ...............................................................................................15

Enable the call logger output for the system....................................................................................................15

Set the Baudrate for the serial port. .................................................................................................................16

Sample SMDR Report......................................................................................................................................18

SMDR Output Options......................................................................................................................................20

Serial Cable ......................................................................................................................................................26

Compact Flash Socket .......................................................................................................................................27

Saving the system configuration ......................................................................................................................27

System Report..................................................................................................................................................28

Loading the system configuration ....................................................................................................................29

Upgrade the XN120 Main Unit Software ..........................................................................................................30

Expansion Socket...............................................................................................................................................33

Summary of Contents for EXIFU-A1


































Search results

Summary of Contents for EXIFU-A1

Reviews:

Related manuals for EXIFU-A1

Brands by name

Popular brands

NEC EXIFU-A1, Installation, Configuration And Operation

Search results

Summary of Contents for EXIFU-A1

Reviews:

Related manuals for EXIFU-A1

Brands by name

Popular brands