Call Logging (SMDR)
XN120 EXIFU Guide
15
Serial Socket - Call Logging (SMDR)
The serial port of the EXIFU-A1 or EXIFU-B1 can be used to output call information for the telephones
connected to the system.
You would normally collect the call information with a compatible call logging application loaded onto a
separate PC.
You must enable call logging on the XN120 system before the information will be output via the serial port of
the EXIFU.
Which trunks will output to the call logger.
You must enable SMDR output for each trunk on the XN120 with program 14-01-06.
1
Program 14-01-06
Enable SMDR for each trunk.
Ø
Enter 1 to enable SMDR (enter 0 to disable).
Ø
Press HOLD to confirm the entry.
Ø
Press DC several times when you are done to return to the
Program Mode.
Ø
(Press SPK to save changes and exit if you are finished).
Which telephones will output to the call logger.
You must enable SMDR output for each telephone on the XN120 with program 15-01-03.
1
Program 15-01-03
Enable SMDR for each
telephone.
Ø
Enter 1 to enable SMDR (enter 0 to disable).
Ø
Press HOLD to confirm the entry.
Ø
Press DC several times when you are done to return to the
Program Mode.
Ø
(Press SPK to save changes and exit if you are finished).
Enable the call logger output for the system.
You must enable SMDR output for the XN120 with program 35-01-01.
1
Program 35-01-01
Enable SMDR for the system.
!
Ensure that you set SMDR-
P1
Ø
Enter 1 to enable SMDR (enter 0 to disable).
Ø
Press HOLD to confirm the entry.
Ø
Press DC several times when you are done to return to the
Program Mode.
Ø
(Press SPK to save changes and exit if you are finished).
14-01-06 Trunk 1
SMDR Print-out 1
Enter 1 to enable SMDR
output for the trunk
Use Vol. Keys to
select another
trunk
15-01-03 TEL 200
SMDR Printout 1
Enter 1 to enable SMDR
output for the telephone
Use Vol. Keys to
select another
telephone
35-01-01 SMDR-P1
SMDR Printout 1
Enter 1 to enable SMDR
output for SMDR-P1
Use Vol. Keys to
select the SMDR
port (1 or 2)
