NEC DT730 User Manual Download Page 46

Page: 46 / 216

• TO ADJUST TRANSMISSION/RECEIV-

ING VOLUME

Handset volume can be changed.

Press

and

key. The LCD displays the

current volume.

Press

and

key again to alternate

between Small and Large volume.

• TO ACTIVATE HANDS-FREE

To set hands-free on:

Press

and

key. The LCD displays:

To Set Hands-Free Off:

Press

and

key. The LCD displayss:

• CALL INDICATOR LAMP ON/OFF

The user can choose to turn the call indicator lamp

either on or off during ringing.

Press

and

key. The LCD displays:

• DYNAMIC DIAL PAD ON/OFF

The user can originate a call at first hand without lifting

handset or pressing

key.

Press

and

key. The LCD displays:

Feature

4:26 PM TUE 13 APR 2004

T/R VOL.

SMALL

Feature

4:26 PM TUE 13 APR 2004

T/R VOL.

LARGE

Feature

4:26 PM TUE 13 APR 2004

HANDS FREE

Feature

TIP:

The call indicator lamp lights when used as a
Message Waiting Lamp, even when it is turned
off by the above operation.

4:26 PM TUE 13 APR 2004

HANDS FREE

OFF

Feature

4:26 PM TUE 13 APR 2004

INDICATOR ON

4:26 PM TUE 13 APR 2004

INDICATOR

OFF

Speaker

Feature

4:26 PM TUE 13 APR 2004

Direct Dial Pad ON

Summary of Contents for DT730

























































































































































































































Search results

Summary of Contents for DT730

Reviews:

Related manuals for DT730

Brands by name

Popular brands

NEC DT730, User Manual

Search results

Summary of Contents for DT730

Reviews:

Related manuals for DT730

Brands by name

Popular brands