Section 2: Customizing Features
2-16
◆
Section 2: Customizing Features
DS1000/2000 Quick Setup Guide
Programming
There are 3 steps to setting up a Door Box in DS1000:
●
Part I: Assign the Door Box chime tone.
The Door Box alerts the extensions in the Door Box Ring Group (assigned in Part II) using the
chime type you select.
●
Part II: Set up the Door Box Ring Group.
To have Door Box chimes alert extensions, the extensions have to be in the same Ring Group as
the Door Box.
●
Part III: Program analog Door Box relay control.
After answering a Door Box chime, the extension user has the option of pressing a key to acti-
vate the system’s relays.
Part I: Assign the Door Box Chime Tone
The circuit type is automatically set for DS1000 Analog Door Boxes plugged into DOOR1 or
DOOR2 (extensions 324 and 325).
1.
Enter the programming mode. You see:
2.
Enter
1801
+
HOLD
. You see:
3.
Enter the Door Box extension number (324 or 325) +
HOLD
. You see:
4.
Press
VOL Up
until you see:
5.
Enter the chime type (0-3) that the Door Box should use to alert the extensions in its Ring Group +
HOLD
.
0 = Normal Ring Group (Intercom) ringing
1 = Low pitch chime pattern
2 = Mid range pitch chime pattern
3 = High pitch chime pattern
6.
Press
CONF
to go back to step 3 and select another Door Box to program.
OR
Press
CONF
twice to exit program 1801.
Part II: Set Up the Door Box Ring Group
To add the Door Box and other extensions into the Door Box Ring Group:
1.
Enter the programming mode. You see:
2.
Enter
1802
+
HOLD
. You see:
3.
Enter the number of the Door Box (324 or 325) you want to assign to a Ring Group +
HOLD
. You see:
4.
Press
VOL Up
until you see:
5.
Enter the number of the Ring Group (1-8) to which the Door Box should
HOLD
.
Ring Groups 1-8 are preset to use master numbers 600-607.
USER: nnn
ENTER PROGRAM?
1801:EXTENSION PROG
EXTENSION #?nnn
1801:EXT:nnn
PT TYP?DOOR BOX
1801:EXT:nnn
DOOR CHIME?nnnn
USER: nnn
ENTER PROGRAM?
1802:EXT OPT PART I
EXTENSION #?nnn
1802:EXT:nnn
ALLOW DND?nnn
1802:EXT:nnn
RING GROUP NUM?n
