Section 1: Start-up Programming
1-8
◆
Section 1: Start-up Programming
DS1000/2000 Quick Setup Guide
4.
Enter the number of the trunk you want to program (e.g., 1) +
HOLD
. You see:
The currently programmed ringing option for the trunk selected displays.
5.
For the extension and trunk selected, enter the ring
CONF
:
1 = Lamp only (no ringing)
2 = Ringing day and night
3 = Ringing at night, lamp only during the day
4 = Delayed ringing day and night
6.
Go back to step 4 and enter the number of another trunk to program for the selected extension.
OR
Press
CONF
and go back to step 3 to select another extension.
OR
Press
CONF
twice to exit program 1805.
Changing Ringing Assignments With User Programmable Features
A keyset user can change line key ringing right from their phone.
To change line key ringing with the User Programmable Features:
1.
Dial
#RAL
.
Your line keys
fl
ash. The
fl
ash rate shows the type of ringing enabled:
On red = lamp only day and night
On green = immediate ring day and night
Fast
fl
ash green = delay ring day and night
Slow
fl
ash green = immediate ring at night, lamp only during the day
2.
Press the line key to change its ringing mode.
3.
Press
SPK
when you are done.
See
User Programmable Features
on page 1-18 for more.
Placing Outgoing Calls from Single Line Telephones
By default, single line telephone users can dial 9 for an outside line.
If your single line telephone users can’t dial 9 to place outgoing calls, you need to check the following:
●
Part I: Assign some trunks to Trunk Group 90 (which is the default dial 9 group).
●
Part II: Allow analog ports to have full or outgoing access to the trunks in group 90.
Part I: Assign Trunks to Trunk Group 90.
1.
Enter the programming mode. You see:
2.
Enter
1002
+
HOLD
. You see:
3.
Press
HOLD
to select Trunk Group 90. You see:
4.
Dial
1
and press
VOL Up
. (This assigns trunk 1 as your
fi
rst outgoing trunk in group 90.) You see:
1805:EXT:nnn LINE:n
nnnnnnn
1805:EXT:nnn
LINE NUMBER?n
USER: nnn
ENTER PROGRAM?
1002:TRUNK GROUPS
TRUNK GROUP?90
1002:TRUNK GROUP:90
ORDR 1:TRK NUM?UND
1002:TRUNK GROUP:90
ORDR 2:TRK NUM?UND
