Section 1: Start-up Programming
1-12
◆
Section 1: Start-up Programming
DS1000/2000 Quick Setup Guide
6.
Enter
201
+
HOLD
twice. You see:
7.
Press
VOL Up
, then repeat step 6 to assign additional Voice Mail stations (202-208) to the remaining
installed Voice Mail ports.
8.
Press
CONF
to go back to step 4.
OR
Press
CONF
twice to go back to step 3 and select another slot to program.
OR
Press
CONF
three times to exit program 9902.
For Digital VANGARD
Each Digital VANGARD connection is a two-channel device that represents two Voice Mail ports (stations).
In programming, you assign a separate Voice Mail station (201-208) to each channel. The
fi
rst channel is
called the primary station; the second channel is called the secondary station.
1.
Enter the programming mode. You see:
2.
Enter
9902
+
HOLD
. You see:
3.
Enter the slot number (1-8) which contains the DSTU PCB to which your digital Voice Mail is con-
HOLD
. You see:
4.
Enter
P
(7). You see:
5.
Press
VOL Up
until you select the primary station for the
fi
rst (lowest numbered) port to which your
Digital VANGARD is connected.
6.
Enter
201
+
HOLD
twice. You see:
7.
Press
VOL Up
. You see:
8.
Enter
202
+
HOLD
twice. You see:
9.
Repeat steps 6-8 to assign Voice Mail stations to the remaining installed Digital VANGARD Voice
Mail ports.
10. Press
CONF
to go back to step 4.
OR
Press
CONF
twice to go back to step 3 and select another slot to program.
OR
Press
CONF
three times to exit program 9902.
9902:SLOT:n:nASTU
PORT:nn STATION:nnn
USER: nnn
ENTER PROGRAM?
9902:STATION CARDS
SLOT?
9902:SLOT:n:16DSTU
V-RMV/P-PORTS/X-SWAP
9902:SLOT:n:16DSTU
PORT:nn PRI STA?:nnn
9902:SLOT:n:16DSTU
PORT:nn PRI STA?:201
9902:SLOT:n:16DSTU
PORT:nn SEC STA?:UND
9902:SLOT:n:16DSTU
PORT:nn PRI STA?:201
