5-8 Disassembly and Reassembly
Figure 5-8 Removing the Drive
Fan Assembly Removal
Remove the fan assembly per the following steps.
1.
Remove the system access cover per Section 3.
2.
At the rear of the system unit, press in on the two locking tabs securing the
assembly to the chassis.
3.
Remove the fan by pulling it outward away from the system board.
DIMM Module Removal
Remove any optional DIMM modules from the system board as follows.
1.
Remove the system access cover and any expansion boards as previously
described.
2.
Press the locking clips at the ends of the socket away from the DIMM memory
module (see Figure 5-9).
3.
Gently rock the module while pulling it up from the socket.
