3-24 Option Installation
NOTE:
If you removed the accessible device
cage, replace it. Secure the device cage with the
screw.
12.
If you installed a hard drive in the 5 1/4-inch slot, replace the plastic panel.
13.
Replace the front panel.
14.
Replace the access cover.
Replacing the Front Panel
To replace the front panel, follow this procedure.
1.
Align the front panel’s six tabs with their corresponding slots on the system (three
of the tabs have holes, the others have prongs).
2.
Press the front panel squarely into position until the tabs lock the panel in place.
3.
Replace the access cover.
4.
After securing your system, reboot it and run the Setup program to set the new
configuration.
ADDING EXTERNAL OPTIONS
External connectors on the back of the system unit allow for a variety of industry-standard
options.
This subsection provides the installation procedures for the most commonly used external
options, which are as follows:
parallel printer
serial devices.
For other external devices, see the instructions that come with the option.
Parallel Printer
NOTE:
Before connecting a printer to the
system, be sure the printer is set up correctly.
Follow the setup instructions that come with the
printer.
Connect a parallel printer to the system as follows.
