Section 3
Option Installation
This section provides instructions for installing the following options:
expansion boards
memory upgrade
video upgrade — see the documentation for your video board
data storage devices
external options.
All options (except external options) require removal of the access cover. Procedures for
removing the cover are included in this section.
GENERAL RULES FOR INSTALLING OPTIONS
Follow these general rules when installing system options.
Turn off system power and unplug the power cable.
Turn off and disconnect all peripherals.
When handling boards or chips, touch the metal of the system unit to discharge
static.
Do not disassemble parts other than those specified in the procedure.
Use a Phillips-head screw driver, unless otherwise specified.
Label any removed connectors. Note where the connector goes and in what
position it was installed.