Option Installation 3-7
Save the screw for installing the expansion board. Be sure to save the slot cover
for future use.
!
CAUTION:
A slot cover can damage
the system board or any option board if it falls
into the system. Take care to keep the slot cover
from falling when removing the screw.
If the slot cover does fall into the unit, remove it before replacing the cover.
4.
Hold the board by its edges and insert it into the expansion slot.
5.
Press the board firmly into the expansion slot connector. Gently rock the board
from side-to-side to seat it into the connector.
6.
Insert the screw removed earlier to secure the expansion board to the support
bracket.
Figure 3-5 Installing a Board
7.
Attach any cables required by the expansion board.
8.
Replace the access cover.
Expansion Board Removal
1.
Remove the system access cover.
2.
Label and remove any cables connected to the board.
