Setup Utility 2-7
NOTE:
If you select the Enabled option, you can
see additional options that allow you to specify
the Base I/O address and IRQs for the port you
are configuring.
Parallel Port
This option configures the system’s Parallel Port. Choose “Auto” (default),
“Enabled,” or “Disabled.” The “Auto” setting causes the Setup program to assign
LPT 1, 378h, IRQ7.
NOTE:
If you select the Enabled option, you can
see additional options that allow you to specify
the Base I/O address and IRQs for the port you
are configuring.
Mode (Parallel Port)
This option sets the mode for the parallel port. The options include “Output Only”
(AT-compatible mode), “Bidirectional” (PS/2-compatible mode), “EPP”
(Extended Parallel Port – high speed bidirectional), and “ECP” (Enhanced
Capabilities Port – high speed bidirectional).
!
CAUTION:
An asterisk symbol
appearing next to an option indicates that the
selected IRQ is set to conflict with another
device.
Audio
This option configures the onboard audio system. Select “Enabled” (default) or
“Disabled.”
Legacy USB Support
This option configures support for legacy USB devices. Select “Enabled” or
“Disabled” (default).
To return to the Advanced Menu, press
Esc
.
