Disassembly and Reassembly 5-7
Figure 5-6 The 3 1/2-Inch Device Bracket Screws
4.
Slide the 3 1/2-inch hard disk drive towards the back of the system unit until it is
free of the molded plastic.
5.
Remove the screw on the side of the hard disk securing it to the bracket.
Figure 5-7 Removing the Securing Screw
6.
Slowly pull the hard disk away from the bracket and lift the disk out of the two
securing tabs on the opposite side of the bracket.
Summary of Contents for DIRECTION L - SERVICE
Page 9: ...x Contents...
