NEC DIRECTION L - SERVICE, Service Manual

Page: 28 / 139

2-4 Setup Utility
A Maintenance Menu appears when the system is in configure mode. See Appendix C for
information on putting the system in configure mode. This menu allows you to change the
processor speed and to clear user and supervisor passwords.
To select an option from the menu bar, use the left and right arrow keys. See “Exiting
Setup” in this section for a description on exiting the Main Menu.
Legend Bar
Use the keys listed in the legend bar on the bottom of the Setup menu to make the
selections or exit the current menu. Table 2-1 describes the legend keys and their alternates.
Table 2-1 Setup Key Functions
Key Function
F1 Provides help for the parameter field being displayed.
Esc Exits the menu.
←
or
→
arrow keys
Selects next menu.
↑
or
↓
arrow keys
Moves cursor up and down for item selection.
Enter Executes a command or selects submenu.
Selecting a Menu Item
To select a menu item, use the up/down arrow keys to move the cursor to the desired field.
Then press
Enter
. The Exit Saving Changes command in the Exit Menu saves the values
currently displayed in all the menus.
Displaying a Submenu
To display a submenu, use the up/down arrow keys to move the cursor to the desired
submenu. Then press
Enter
. A pointer (a right-pointing triangle) marks all selectable
submenus.
Getting Help
A Field Help window or Item Specific Help window on the right side of each menu displays
the help text for the currently selected Setup option. It updates as the cursor moves to each
new field.
Pressing F1 on any menu brings up the General Help window that describes the legend keys
and their functions.
Press
Esc
to exit the current window.