2-16 Setup Utility
Removable Drive Submenu
This submenu lists any available removable drives (if included). One common option is
Legacy Floppy Drives. The operating system assigns drive letters to these devices in the
order listed. You can change the sequence (and drive lettering) by highlighting this field and
pressing
Enter
. Then press your keyboard’s
+
or
–
key to move a device up or down the
list. To exit from the Removable Drive submenu, press
Esc
.
Press the right arrow (cursor) key to move to the Exit Menu.
EXIT MENU
The Exit Menu allows you to choose how to exit the Setup program. Press the arrow
(cursor) keys to select the desired option, then press
Enter
to make your choice (or use the
arrow key to select another one).
Exit Saving Changes
This option exits the Setup program and saves your changes to the BIOS.
Exit Discarding Changes
This option exits the Setup program without saving your changes to the BIOS.
Load Setup Defaults
This option loads the Setup program’s default values.
Load Custom Defaults
This option loads Custom default settings.
Save Custom Defaults
This option saves your changes to Custom default settings.
Discard Changes
This option loads previous values from CMOS RAM for all BIOS settings.
NOTE:
If your system’s CMOS fails, the BIOS
will load custom default settings (if you’ve saved
them) or factory default settings.
Finally, press
Enter
again to confirm and exit the Setup program.
Summary of Contents for DIRECTION L - SERVICE
Page 9: ...x Contents...
