2-2 Setup Utility
to customize the system with security features such as passwords.
to set system parameters after replacing the CMOS battery.
HOW TO START SETUP
To start the Setup utility, follow these steps:
1.
Turn on or reboot the system.
2.
Press
F2
after POST begins, but before the system boots up. You have about five
seconds to press F2.
Setup’s Main Menu window appears similar to the following screen.
NOTE:
The screen shown is typical of a system.
The actual settings on the Main Menu depend
upon the hardware installed in the system.
Summary of Contents for DIRECTION L - SERVICE
Page 9: ...x Contents...
