384i/704i
Remote Modem Installation Instructions
23
10. Type
ATDT #*#*
and press
Enter
.
If you see ERROR, type ATZ to reset the site modem’s DCI/seri-
al port. You can then go on to step 11.
11. When the remote system asks for the password, enter the programming
password and press
Enter
.
You can now program the remote system. If you see an ID
code/software version error message, type U to update.
12. Press
Esc
twice to return to the
Main Menu
.
704i Only:
To call the site modem:
1.
Select the
Online (Remote) Operation
in the 704i Windows PC
Program and enter your database password (when requested).
2.
Enter the modem’s telephone number and click
Dial.
3.
Select either DCI or LAPB, depending on equipment being used.
The LAPB requires 704i software 1.01.04 or higher.
4.
Once the modem connects (this could take a couple of minutes), enter
the programming password when requested.
7. Upload a Test Block
Now that you have connected to the system through your laptop and the site
modem, you should upload a block of data to make sure that the communications
are working correctly.
384i Only:
1.
From the
Main Menu
, select
Communication
and press
Enter
.
2.
Select
ME->PC
and press
Enter
.
3.
Choose
Select Programs
and press
Enter
.
4.
Select
10 Extension Options
and press
Enter
.
5.
Select
1005 Station Class of Service
and press
Enter
.
This marks program 1005 for uploading to your PC.
6.
Press
F10
to upload the data.
7.
When you see the Receiving Completed message, press
Esc
then
F8
to return to the Modem Screen.
8.
Press
F4
to break the connection, then
Esc
repeatedly until you
return to the Main Menu.
9.
Quit the Remote Maintenance program and disconnect your test
modem.
92600MDM11.QXD 11/7/01 12:21 PM Page 23