384i/704i
Remote Modem Installation Instructions
21
To test your office modem setup:
Never call the site modem without first using the following steps
to test your office modem.
1.
From the
Main Menu
, select
Communication
and press
Enter
.
2.
Select
Modem Control
and press
Enter
.
3.
Type
AT&F
and press
Enter
. Your computer should echo back
OK
.
If you don’t get the proper response (OK), check your modem
connections and settings and repeat step 3.
704i Only:
To set up your office modem:
1.
Make sure your modem is properly connected to your computer and
functioning correctly.
Your modem can connect to COM1, COM2, COM3 or COM4.
2.
Select the
Online (Remote) Operation
in the 704i Windows PC
Program and enter your database password (when requested).
3.
Click the
PORT SETTINGS
button.
4.
Select the
COM Port
(1 - 4) to be used and set the RS232 options for:
9600
(Bits per Second),
8
(Data Bits),
none
(Parity),
1
(Stop Bits),
None
(Flow Control) then click
OK
.
These settings must match those you made for Program 1201 in
Step 1 - Program the DC / Serial (LAPB Port).
5.
Click the
INITIALIZE MODEM
button. Without changing the initial-
ize string, click
OK
.
To test your office modem using Windows“ HyperTerminal program:
Never call the site modem without first using the following steps
to test your office modem.
1.
Start the HyperTerminal program. (Click START - PROGRAMS -
ACCESSORIES - HYPERTERMINAL. Double-click on the
HYPERTRM.EXE file.)
2.
Create a name for the new connection, such as MODEM SETUP and
click
OK
.
3.
Select the
COM Port
(1 - 4) to be used and click
OK
.
4.
Set the RS232 options for:
9600
(Bits per Second),
8
(Data Bits),
none
(Parity),
1
(Stop Bits),
None
(Flow Control) then click
OK
.
5.
Type
AT&F
and press
Enter
to default the modem.
If you don’t get the proper response (OK), check your modem
connections and settings and repeat step 5.
Close the HyperTerminal Program. You do not need to save the
modem file created.
92600MDM11.QXD 11/7/01 12:21 PM Page 21