NEC 1260 - SuperScript - Printer, User Manual

Page: 31 / 168

LED Operation
2-7
Table 2-1: Condition Indications and Solutions
LEDs CONDITION CAUSE/SOLUTION
On Line (green)
on steady Ready The printer is ready.
Note: Pressing the On Line button will take the printer offline.
On Line (green)
blinks In use The LED blinks while the printer is processing a job from your
computer or while finishing printer warm up and initialization. This
includes waiting for the computer to send additional data or for the
printer engine to move paper.
On Line (green)
blinks slowly Energy Saving The LED blinks slowly while the printer is in Energy Saving Mode.
Energy Saving Mode starts after the printer has been READY as long
as specified by the Energy Saving Mode setting. The printer exits
Energy Saving Mode when it receives a job, or the On Line Button is
pressed.
On Line (green)
double-blinks Waiting PCL data left in the printer.
Corrective action: Pressing the On Line button will cause a Form Feed
then resume to Idle/Ready.
On Line
(green)blinks
Cassette/Error on
steady Wrong paper size You have loaded a different sized paper in your paper cassette or tray
than specified.
Corrective Action: Press the On Line button once to manually feed the
correct paper size. Press the On Line button again to use paper from
the upper cassette. There is no size sensing in the Multi-purpose tray
or the optional Envelope cassette.