NEC 1080Xd User Manual Download Page 67

Page: 67 / 216

Service Processor 3-17

CM (Change Command Mode)

Execution:

This command can be executed in the AC POWER ON state or DC POWER ON state.
Entering Maintenance mode requires the entry of a password.

Function:

Changes from Normal mode to Maintenance mode. When the system is in Maintenance
mode, the Status LED on the front of the server is amber.

Note:

The CM command can be executed in Normal mode or

Maintenance mode.

Table 3-19. CM Command Screen

Screen Image

Reference

iSPyz:---> cm

<ENTER>

Password is needed to enter maintenance mode.
maintenance password : xxxxxxxx <

ENTER>

incorrect.
maintenance password : xxxxxxxx <

ENTER>

Command Mode was changed to maintenance mode.

Table 3-20. CM Screen References

Reference

Description

To switch from Normal mode to Maintenance mode, a password is required.

If you enter a

wrong password, a message is displayed and the system waits for

another password entry. If you enter an incorrect password three times in a row, the
command terminates.

Passwords are case sensitive.

After the mode change to Maintenance mode is displayed, the command terminates.

Summary of Contents for 1080Xd

























































































































































































































Search results

Summary of Contents for 1080Xd

Reviews:

Related manuals for 1080Xd

Brands by name

Popular brands

NEC 1080Xd, User Manual

Search results

Summary of Contents for 1080Xd

Reviews:

Related manuals for 1080Xd

Brands by name

Popular brands