manualshive.com logo in svg

NEC 1080Xd, User Manual

Share
Download
NEC 1080Xd User Manual Download Page 63

 

Service Processor  3-13 

SP Command Prompt 

In SP command mode (Normal Mode or Maintenance Mode), one of the following 
types of command prompt is displayed when you press the ESC key. 

Interactive operations for each SP command and prompts for subcommand entry 
depend on the SP command. 

Table 3-14.  SP Command Mode Prompts  

Prompt Description 

ISPyz:--> 

Command prompt in Normal Mode. 

ISPyz:MNT> 

Command prompt in Maintenance Mode. 

 

SP Message Header 

SP messages have a header in the formats listed in the following table. 

No message header is added to the prompts and messages that appear during interactive 
operations in each SP command. 

Table 3-15.  SP Message Header Formats  

Message Header 

Description 

[iSPyz:INFO.cccc] string 

Indicates an information message. 

“cccc” is the ID assigned to each message. 

“string” is the message body. 

[iSPyz:WARN.cccc] string 

Indicates a warning message. 

[iSPyz:ERRORcccc] string 

Indicates an error message. 

 

Summary of Contents for 1080Xd

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands