NDS EndoVue Plus 15", User Manual

Page: 8 / 36

1
2
Powering On The Unit:
Connect the power supply to the display via the power plug. Plug in the AC adapter. Connect a video source to the
display. Apply power to the peripheral device, then to the display. The power switch location is shown on page 2.
The NDS logo is displayed, followed shortly by video.
The electronics, designed by NDS, incorporates proprietary SmartSync™ technology which at initialization, examines
the incoming signal and automatically displays the video image in its proper format. This eliminates adjustments for
most video sources. To
fi ne tune the image, please refer to “Image Adjustments” on page 3.
First time users and initial test:
Visually, Flat-Panel (LCD) images will look crisper than those of a traditional CRT. For the same reason, live video may
appear a little blocky. Users not familiar with the image differences should familiarize themselves before utilization in
a critical application and determine its usability. It is recommended that
fi rst time users view the display next to a
CRT to familiarize themselves with any subtle differences in viewing quality.
Quick Startup
About This Manual
This manual is designed to assist the user with proper installation, setup and operation of the display. Depending
on the model and options that were purchased, some of the features and options in this manual may not apply to
the display you are using.
A numbered tab on the side of the page denotes the beginning of a section.
Intended Use and Contraindications
Intended Use:
This monitor is intended for use in a medical environment to display high quality video and graphic images .
Contraindications:
The monitor may not be used in the presence of fl ammable anesthetics mixture with air, oxygen or nitrous oxide.
No part of this product may come in contact with a patient. Never touch the product and a patient at the same time.
This product is capable of displaying Radiology (PACS) images for reference, not diagnostic, purposes only.
For mission critical applications, we strongly recommend that a replacement unit be immediately available.
Warning: Leaving a fi xed (constant) image on the monitor for a long period of time can result in image
retention ("burn in"). Avoid leaving a fi xed image on the monitor’s screen or turn the monitor off when it is
not in use.
Image Retention Notice