NDS EndoVue Plus 15", User Manual

Page: 14 / 36

7
VGA / RGBS Picture Menu
YPbPr Picture Menu
Horizontal Position
Moves the image to the left or right. Press ◄ or ► to horizontally center the image.
Vertical Position
Moves the image up or down. Press
◄
or
►
to vertically center the image.
Sharpness
Press ◄ or ► to adjust the sharpness (focus) of the displayed image.
Phase
Press
◄
or
►
to adjust the phase of the display’s pixel clock.
Frequency
Adjusts the frequency of the display’s pixel clock. With Scaling set to Fill adjust until image just fi lls the
screen horizontally. Press
◄
or
►
to adjust the frequency of the display’s pixel clock.
Overscan (Video)
This parameter is enabled when the input is video (camera) data.
0 = The image is displayed at a size that fi lls the screen without losing any video information. The image
presented to the display may include black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps. As the
image becomes larger video information will be lost from the top and bottom and / or left and right.
Select using
◄ or ► buttons.
Scaling (Graphics)
This parameter is enabled when the input is graphics (computer) data.
Fill = Expands the video image to fi ll the entire screen. The aspect ratio may not be accurately displayed.
Aspect = Expands the video image until its largest dimension fi lls the screen. Image may be displayed with
black bars on the top and bottom or the left and right. 1:1 = Displays the video data in its native size and
aspect ratio. Image may be displayed with black bars on the top and bottom and on the left and right.
Select using
◄
or
►
buttons.
SmartSync / Alternate Modes
On initialization NDS’ proprietary SmartSync technology examines the incoming signal and automatically
displays the video image in its proper format. To run SmartSync select the SmartSync / Alternate Modes
parameter and press the
◄
button. An Alternate Mode may be selected by pressing the fl button.
The Alternate Mode (format) parameter has two arguments X and Y. The left (X) argument is the current
mode and the right (Y) is the number of modes available. The mode (format) and / or Frequency changes
each time the
►
button is pressed. When the mode count reaches its maximum the next
►
button press
returns the mode count to 1.