Installation
Single Phase MultiCube Page 17
3. Installation
3.1 Panel Mounting
Panels should be of thickness 1mm to 4mm with a square cut-out of 92mm (+0.8 -
0.0). A minimum depth of 72mm should be allowed behind the panel for the meter.
Remove the panel mounting clips and insert the meter into the cut-out from the front
of the panel. Push the meter home. Ensure the screws in each panel mount clip are
fully retracted and insert the clips as shown in the diagram below. Tighten the screws
to secure the meter firmly in the panel.
DO
NOT
OVERTIGHTEN.
Figure 3-1 Fitting The Meter in a Panel
Summary of Contents for MultiCube Single Phase
Page 1: ...MultiCube Single Phase Multi Function Electricity Meter Installation and Operation ...
Page 2: ......
Page 31: ......
