ND MultiCube Single Phase, Installation And Operation Manual

Page: 15 / 32

Meter Operation
Single Phase MultiCube Page 15
2.5 Energy Register Reset
All accumulating energy registers may be simultaneously reset to zero using the front
panel keys. Once reset, energy readings are lost forever so great care must be taken
when using this feature. To reset all energy registers
•
Select any energy display page as described above
•
Press
P
and
E
keys together and Hold for 5 seconds.
2.6 Peak Voltage Reset
The peak voltage reading may be reset to zero using the front panel keys. Once
reset the old value will be immediately replaced by the latest instantaneous reading
and subsequent peaks as they occur. To reset Peak Voltage
•
Select the Voltage display page as described above
•
Press
P
and
E
keys together and Hold for 5 seconds.
2.7 Peak Current Reset
The peak current reading may be reset to zero using the front panel keys. Once
reset the old value will be immediately replaced by the latest instantaneous reading
and subsequent peaks as they occur. To reset Peak Amps
•
Select the Current display page as described above
•
Press
P
and
E
keys together and Hold for 5 seconds.
2.8 Peak Demand Reset
Peak rolling demand readings (Amps and kW) may be reset to zero using the front
panel keys. At the end of the next sub period the peak will be set to the latest rolling
average value. To reset the Peak MD
•
Select the Ampere Demand or Watts Demand display page as required
•
Press
P
and
E
keys together and Hold for 5 seconds.