Programming
Single Phase MultiCube Page 23
4.4 Setting The PT Primary Voltage
The next item in the programming menu allows the user to set the PT Primary line-
line voltage, in the range 60V to 50,000V, to match the primary of the potential
transformers connected to the meter inputs. The secondary of the PTs must match
the nominal line-line input voltage specified on the meter label. If no potential
transformers are fitted the PT setting must match the nominal line-line input voltage
specified on the meter label.
Figure 4-2 Setting The PT Primary Constant
Press
U
to increase the PT Primary Constant in steps of 1 Volt.
Press
V
to decrease the PT Primary Constant in steps of 1 Volt.
Press
↵
and hold for 2 seconds when done.
Summary of Contents for MultiCube Single Phase
Page 1: ...MultiCube Single Phase Multi Function Electricity Meter Installation and Operation ...
Page 2: ......
Page 31: ......
