NCR S10 User Manual Download Page 175

Page: 175 / 200

System Support Log

Current System Configuration

NCR S10 Desktop Server User Guide

D-33

Current System Configuration

This section is for recording and maintaining
information about system components and peripherals.

Complete the following on the forms provided in this
section:

•

Adapter board locations

•

System equipment list

•

Hardware configuration report (a printout of current
system I/O configuration)

Record the physical location of each adapter board
installed in the CPU.

This list provides a convenient location to record the
serial numbers, class/model numbers, and location of
system equipment.

As you make changes in the system, make a listing of
the system’s current I/O configuration in this section.

Adapter Board
Locations

System Equipment
List

Hardware
Configuration Report

Summary of Contents for S10









































































































































































































Search results

Summary of Contents for S10

Reviews:

NCR S10, User Manual, Page: 175 / 200

Search results

Summary of Contents for S10

Reviews: