manualshive.com logo in svg

NCR S10, User Manual, Page: 122 / 200

Share
Download
NCR S10 User Manual Download Page 122

Sample Configurations
Sample Standard Configuration

C-2

NCR S10 Desktop Server User Guide

Sample Standard
Configuration

A standard configuration might consist of the following:

• 

Pentium 166 MHz processor with parity memory
support

• 

32 MB system memory

• 

ISA video board with 1 MB video RAM

• 

PCI Ethernet adapter (SMC8432BTA)

• 

PCI Token Ring adapter (Olicom OC-3136)

• 

2 GB SCSI disk drive connected to an integrated
Adaptec 7870 PCI SCSI controller

• 

SCSI CD-ROM drive connected to an integrated
Adaptec 7870 PCI SCSI controller

Following are the steps to install and configure this
sample configuration.

To install the hardware, follow these steps:

1.

Strap the SCSI IDs for the 2 GB SCSI disk drive and
the SCSI CD-ROM drive. (See the documentation
that came with your drives for strapping
information.)

2.

Install the 2 GB SCSI disk drive over the power
supply.

Installing the
Hardware

Summary of Contents for S10









































































































































































































Reviews:

No comments