NCR S10, User Manual, Page: 103 / 200

Using the System Utilities
Using the EISA Configuration Utility
NCR S10 Desktop Server User Guide 5-17
If the system uses resources needed by an ISA option,
you have to release those resources and reallocate other
resources to the system.
To avoid resource conflicts, follow these steps:
1. Specify other resources by selecting Edit, then
Change Resource or Change Function.
2. Select System, then Print to print a list of the
resources.
3. Select View, then Switch, and Jumper Settings to see
how to change the switch and jumper settings.
Make a note of the information.
4. Exit from the utility.
5. Turn off the system and set the jumpers and
switches.
If you have locked the board configuration using Edit
and Lock commands, you need to unlock the
configuration to make all resources available to the
ECU.
To unlock the configuration, follow these steps:
1. Select Edit, and then Unlock to unlock either the
entire system or the current board. The current
board is highlighted.
2. Select OK.
3.
Select System, then Verify.
Avoiding Resource
Conflicts