manualshive.com logo in svg

NCR S10, User Manual, Page: 129 / 200

Share
Download
NCR S10 User Manual Download Page 129

Sample Configurations

Sample Standard Configuration

NCR S10 Desktop Server User Guide

C-9

Send Start Unit Command

[yes]

5.

Press [Enter] to return to previous menu.

6.

Select Advanced Configuration Options and set the
parameters as follows:

Host Adapter BIOS (Config Util...)

[Enabled]

Support Removable Disks...

[Boot Only]

Extended BIOS Translation...

[Enabled]

Display <CTRL-A> Message During
BIOS Initialization...

[Enabled]

Multiple LUN Support

[Disabled]

BIOS Support for More than 2...

[Enabled]

7.

Press [Enter] to return to previous menu.

8.

Press [Esc] until prompted to save configuration.
Save the configuration and the system reboots.

Sometimes the EISA Configuration Utility will not boot.
If this happens, perform the following procedure:

1.

Using the BIOS Setup Utility, disable all PCI
adapters.

2.

Boot the EISA Configuration Utility.

3.

Configure the system.

4.

Return to the BIOS Setup Utility, and re-enable the
PCI adapters.

To configure the memory and other baseboard settings,
follow these steps:

Configuring the
Memory and Other
Baseboard Settings

Summary of Contents for S10









































































































































































































Reviews:

No comments