NCR S10 User Manual Download Page 144

Page: 144 / 200

System Support Log
Preface

D-2

NCR S10 Desktop Server User Guide

This appendix includes the following sections:

•

Support Services

- Information about NCR support

services

•

Hardware Records

- Logs to enter the hardware

performance and service records

•

Software Records

- Logs to enter the software

records

•

Current System Configuration

- Logs to identify

system components and peripherals

•

Preventive Maintenance

- Logs to enter preventive

maintenance activities

•

Installation Records

- A place to file records of the

original parts and configuration of the system as it
was shipped from the factory

•

Customer Support Agreement

- A place to file a

copy of your current support agreement.

•

List of NCR Support Telephone Numbers

- A list of

support telephone numbers for the United States
and other areas of the world

Summary of Contents for S10









































































































































































































Search results

Summary of Contents for S10

Reviews:

NCR S10, User Manual, Page: 144 / 200

Search results

Summary of Contents for S10

Reviews: