NCR RealPOS, User Manual

Page: 102 / 187

5-56 Chapter 5: Programming
Good Read Tone
Tone On/Off A
Off
0
On
Tone
Frequency
(Hertz)
Tone
Volume
Tone
Length
(Milliseconds)
Not-On-File
Tone Volume
When entering Tone Frequency, the adjustment can be
incremented upward by scanning the
Hex B tag. Each time
you scan the Hex B , the tone frequency increases one unit.
Scan the End tag or a valid Hex tag to end this mode.
When entering Tone Length, the adjustment can be
incremented upward by scanning the
Hex C
tag. Each time
you scan the Hex C tag, the tone length increases one unit.
Scan the End tag or a valid Hex tag to end this mode.
When entering Tone Volume, the adjustment can be
incremented upward by scanning the
Hex D tag. Each time
you scan the Hex D tag, the tone length increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
When entering Not-On-File Tone Volume, the adjustment can be
incremented upward by scanning the
Hex E tag. Each time you scan
the Hex E tag, the tone length increases one unit.
Scan the
End
tag or a valid Hex tag to end this mode.
B
C
D
C
D
E E
1
B
22761
Your Program
Good Read Tone
1 1
Protocol