NCR RealPOS 80c, User Manual

Page: 77 / 165

Chapter 2: Hardware Installation 2-21
1. Locate the Display Mount within 4 meters (13 ft.) of the host
terminal.
2. Determine if the cable should be routed down through the
mounting surface or if it should be run on top of the surface. Drill a
hole if necessary.
3. High-Post Mount: If you are installing High-Post model secure the
Mounting Plate with screws (4) that are provided.
14622
Mounting Plate
4.06 mm (0.160 in.) Diameter
7.6 cm
(3.0 in.)
1. Connect the Display Cable to a powered RS-232 connector on the
terminal.
19807
Mic Audio
Out
E D C B A 24V
RS232/C RS232/D
RS232/A RS232/B VGA DVI-1 Parallel LAN PS/2
Powered
RS-232 Ports
(A, D, C)