NCR RealPOS 72XRT POS User Manual Download Page 180

Page: 180 / 202

13-168

Solid State Drive Optimization

Starting the Intel SSD Toolbox

If Intel SSD Toolbox does not start immediately after installation, start the application
one of two ways:

1. Double-click the Intel SSD Toolbox icon on your desktop.

2. Open the Windows

Start

menu and click >

AllPrograms

Intel

IntelSolid

StateDriveToolbox

The toolbox main screen is displayed.

The Intel SSD Toolbox home screen shows all Intel Solid-State Drives and hard disk
drives installed in your system.

Click on the drive you want to manage. If your system contains multiple drives, use the
arrows to the left and right of the drives to scroll through and select a drive.

Note:

If a drive contains a partition or is installed as a cache, it appears as a separate

drive on the home screen. See Identifying a Drive for more details.

Drive Summary information appears for the selected drive. (Information varies
depending on the drive you select.)

Summary of Contents for RealPOS 72XRT POS











































































































































































































Search results

Summary of Contents for RealPOS 72XRT POS

Reviews:

Related manuals for RealPOS 72XRT POS

Brands by name

Popular brands

NCR RealPOS 72XRT POS, User Manual

Search results

Summary of Contents for RealPOS 72XRT POS

Reviews:

Related manuals for RealPOS 72XRT POS

Brands by name

Popular brands