NCR RealPOS 72XRT POS, User Manual

Page: 199 / 202

Chapter 15:
Maintenance
Cabinet and Touch Screen Cleaning Procedures
1. Disconnect the unit from the power outlet before cleaning.
2. Use a soft cloth dampened lightly with a mild non-abrasive soap & water solution or
70% Isopropyl Alcohol.
3. Gently wipe the subject area clean.
4. Wipe the damp areas dry. Make sure the glass and touch screen edges are
completely dry before using the unit.
5. Avoid getting any liquids inside the unit. If liquid does get inside, have a qualified
service technician check it before you power it on again.
6. Remove (vacuum) extra dust from around the cooling vents (See Cooling Vent
Cleaning section).
Cleaners/Solvents to Use
Use the following cleaner/solvents to clean the unit.
• Mild Non-Abrasive Soap and Water Solution
or
• 70% Isopropyl Alcohol
Cleaners/Solvents to NOT Use
Do NOT use any of the following to clean the unit.
• Methyl Alcohol
• Degreasers
• Ammonia-based Cleaners such as glass cleaners (Windex)
• Abrasive Cleaners
• Vinegar Cleaners
• Any Strong Dissolvent
• Thinner
• Benzene
• Compressed Air.
• Solvents
• Bleach