8
Tri-Light/Lane Light with IP Camera (Standard) and Label
Installing the Tri-Light/Lane Light Pole with Hole Cable
To install the Tri-Light/Lane Light Pole with Hole Cable to the 7360 unit, follow these
steps:
Note:
The Tri-Light/Lane Light Pole with Hole Cable is required in installing the Tri-
Light/Lane Light with IP Camera kits only on a 7360 unit.
1. Remove the existing Tri-Light/Lane Light Pole, if necessary. For more information,
refer to
Removing Tri-Light/Lane Light Pole
2. Loosen the star-shaped washer around the keylock assembly.
3. Remove the two (2) back panels from the Tower Assembly.
